The Swan and the Peacock
Purchasing an Energy Efficient Room Air Conditioner

Purchasing an Energy Efficient Room Air Conditioner

Looking for an air conditioning system may be a process for the homeowner with every one option and the forms out there. So as to maintain your sanity (and your cash ), it’s helpful to have some tips at your disposal in order to narrow down your options to only the ones that meet your needs. Here are some high-level guidelines to help you determine the best choices for you. I can list subsequently expensive to most expensive.

Portable Air Conditioners

Mobile air conditioners are a fantastic utility appliance to have in any house. They are excellent for providing place cooling for areas or rooms in an’as needed’ basis. So that you will need access to allow this occur You’ll have to channel the heat to the exterior via the duct. Condensation is also gathered inside of the unit and needs to be emptied after each use or whenever it fills up. You need to view them as an appliance such as your vacuum cleaner that may be pulled out when needed and put away when not being used when contemplating portable air conditioners. Then this is probably not the best solution for your application, In the event, you imagine yourself using this appliance on a continuous basis in a location. Should You decide to proceed with the option that is portable, here are some features that you should consider:

Get the maximum BTU rating that you can spend.

Locate a unit with an automated shut-off when the condensation reservoir fills up.

Search for units that come equipped with a washable air filter. This may cut back on your maintenance expenses.

Other choices including timers, oscillators, wheels, etc., are a matter of personal taste and price range.

Window Mounted Air Conditioners

Window units are a fantastic solution for heating individual rooms inside your house and therefore are utilized as the most important cooling solution in the majority of the northern US where high temperatures are limited to approximately three months from this year. Window components can be installed from the typical homeowner without the aide of an ac professional. It’s uncommon to see although they are not intended to be permanent fixtures. The disadvantage to the window is that they produce a lot of sounds, both indoors and outside. Then you will need additional units for the rooms if you want to cool more than 1 space. Listed below are a few considerations if you are shopping for window components:

Maximum BTU rating which you can afford.

A sturdy window/window frame to support the weight of this device.

Condensation stands from the back of the unit. Make sure that it is not going to land somewhere that will lead to a potential health hazard for kids and pets.

You’ll need a 3-prong socket within close proximity of your own window to offer power to the unit.

Is the filter available from the front of the unit? This is particularly important for storyline software.

Mini-Split -or- Ductless Air Conditioners

That is really a 2-piece cooling solution that does about the same job as window components but doesn’t expect a window and is quite quiet. There is A hole punched from the outside wall of your house to supply cool air. A copper tube connects the condenser that’s set up onto a slab beyond your house and the fan unit. Ductless systems that I’ve set up are the end result of which the sound wasn’t acceptable, or not owning a window open at which the cooling system was required. If this sounds like you, then here are some things you should consider before selecting the unit:

The device should be sized by an expert based on the square footage of the area to be cooled as well as the weather. Considerations like sealing and orientation of the outside walls play in the calculation. Hogg Mechanical

Look for a washable air filter to reduce your maintenance price.

R-22 Freon has been phased out, therefore just think about a PURON-based alternative. Split System Central Air Conditioners Split system central air conditioning has become the alternative from the southern US or in specific most places where high temperatures stretch for 6-months or more. There are 3 components to a broken system solution: The compressor which is mounted onto a slab beyond your home, the condenser and the blower/heater that are installed in-line along with your ductwork. The rooms in your house and the blower’s ductwork services each one doubles as a heater for the short winter months. The air filtered via a return duct and is recirculated within your house. If your house was not originally designed to support a central heat and air-conditioning solution, then hoping to retrofit can be very expensive. Routing the ductwork can be tricky if not impossible in some cases for houses not designed to permit for it. Then you should consider the following if you are considering a new central heating and Ac alternative:

Don’t use the dimensions of your previous unit to determine the size needed for a replacement unit. Nearly all systems installed in the USA are. Installing a unit which is too big will lead to higher energy consumption and less condensation removal. Have an expert size your system based on Manual”J” standards. If your Ac professional Doesn’t know what’s, then run away quickly (-;

Consider replacing your ducts in the identical time. Old ductwork contains mold and other health dangers. New ductwork will give you efficiency and a healthier living environment.

Contemplate only Puron-based systems because freon (R22) coolant is being phased out.

Weigh the price of systems using a SEER rating of 16 or greater against those with a lower SEER rating to find out the Energy Tax Credit provided by the EPA will work for you.

When you have health issues, then you might choose to look into digital air cleaners and UV lights as extra low-cost accessories which can be installed in-line for a cleaner atmosphere.

Bundle System Air Conditioners

A bundle system is a single unit solution which comprises each the elements that are observed at a split platform solution inside a single unit. There is most bundle system in office buildings. There are a few home applications in largely high-end houses where the components are concealed from the sight so as not to disrupt the landscaping. The other principal difference between a package system versus a busted system is heat exhaust is pumped outside and that air is channeled in from the outside. As a result of this, bundle solutions are less energy efficient than divide systems.

You’ve got precisely exactly the same concerns when looking at a package solution because you do with a split system. The sole difference is that the SEER rating requirement is 14 rather than 16.

Hopefully, we have provided you some information that will help narrow down the apparently endless alternatives which are available for your air conditioning requirements.

Back to Top